Whirlpool washers with automatic locks help keep water out of your home, but sometimes these locks fail. In such cases, the door locked light may flash and the machine will stop working properly.
It can be caused by a number of things, but one common cause is an issue with control lock. To fix it, press and hold the button with “control lock” written beneath it for three seconds.
Check the Door Latch
If the Whirlpool washer’s door lock light is flashing, then there may be an issue with its latch. Before trying to resolve other problems, make sure you inspect this first.
Door latches are essential tools for locking and closing a door, typically made of metal. There are various types of latches, including hasps and hooks/eyes. A hasp is one of the oldest forms; it consists of a strap punched with a slot then attached to a staple which also has been punched.
Another type of latch is a lock and hasp, consisting of a pin that locks in place when turned. This method of fastening doors or gates has become widely popular over time.
Your home’s latches are typically constructed of either brass or bronze. These materials offer durability and can be aesthetically pleasing.
If you notice your old latches are broken, faulty, or missing, it’s time to replace them with new ones. Doing this will keep your house secure from break-ins and other mishaps.
When installing a new latch, be sure to match it up with the rest of your door. Measure from the edge of your door to the centre of the stile and use this measurement as reference point for choosing an ideal latch that fits perfectly on your door.
For instance, if your door is glazed, opt for a latch that is smaller than the frame of your door. This will make installation simpler and ensure everything fits securely.
If your tubular latch has bolt-through fixing holes, make sure it can be fastened directly onto a door frame and also works with your existing handlesets.
Finally, ensure the latch case has a hole to attach the latch follower; this should be located at the rear of the latch.
Whirlpool washers often experience door locks that need fixing, and if you’re unsure how to tackle the task yourself, hiring a repair professional could be your best bet. Although dealing with such an issue can be frustrating, it can easily be resolved quickly and efficiently by an experienced technician.
Check the Striker
If your Whirlpool washer’s door lock light is flashing, there are a few easy fixes you can try to resolve the problem. First of all, consult your model manual and look for a troubleshooting section – in this section will you find solutions to most common machine issues.
One of the most common reasons for a Whirlpool washer’s locked door light to flash is misalignment between its striker and latch assembly. This can lead to problems with either top loading or front loading washing machines.
The striker is an integral component of your Whirlpool washer’s door locking system and helps press down the lid switch. If it is out of alignment, it could prevent proper closing of the door and may cause flashing lights to indicate that something is wrong.
Another possible reason the striker may not be aligned properly is if the wires connected to it are damaged or defective. If these wires are the cause of your problem, you will need to replace them with a fresh set of connections.
If this doesn’t solve your issue, you will need to inspect the control board on your whirlpool washer. This is the main part that controls everything else in the machine; if it’s malfunctioning, you will experience difficulty opening and closing the door.
Additionally, make sure your water flow is optimal by inspecting the inlet hose for any kinks or obstructions.
This fix should only take you a few minutes to complete. Simply unplug your machine for a few minutes and then plug it back in – this should reset the control panel and make everything function normally again.
Ultimately, the best solution to your Whirlpool washer’s door lock flashing issue is to have it repaired by a professional. Doing this can save time, money and stress in the long run – just be sure to do some research before calling a company and having them come out to your home to assist with the issue at hand.
Check the Switch
When your Whirlpool washer’s door lock light flashes, it could be indicative of an issue with its switch or related component. Checking the switch is usually a quick and easy way to identify what’s ailing your appliance.
First, use a multimeter to test the continuity of the switch – its ability to open and close properly. If it does not carry current, you need to replace it with an appropriate replacement part.
Next, take off the front panel of your washing machine and locate the lock assembly on the right side. This should include a small plastic tab that can be pulled down to unlock it.
Front-loading machines must have this safety feature to prevent water from spilling out the bottom and onto your floor. If the door lock assembly is malfunctioning, it could be due to broken or missing components.
In rare cases, this issue can also be caused by a temporary loss of neutral feed to the control board. If this is true, unlocking the washer may become impossible since there’s no way to get neutral into its respective door latch.
You may be able to resolve this problem by taking the control board out of the machine and reconnecting its wires. Doing so will enable the control board to reset itself and solve your lock issue.
Another option is to replace the door switch or lock assembly with a new one. These parts are typically inexpensive and can be installed by an experienced technician at minimal cost.
No matter why your Whirlpool washer’s door lock lights are flashing, it is essential to identify and resolve the cause quickly. Doing so can save you both money and hassle in the long run.
It’s essential to remember that a Whirlpool washers e1 f9 door locked light flashing issue may be caused by various things, including water flow issues. If you notice any kinks or clogs in the inlet hose, be sure to clean them out promptly.
Check the Lid
If you’re having difficulty unlocking the door on your Whirlpool washers, there could be several causes. Most commonly, it could be a malfunctioning lid switch. Another possibility is something has gotten caught in the drain line or filter drain and won’t allow water to drain from the machine.
One way to verify if there is an issue with the lid is to take off the top panel and look inside. You should find a small circular tab made of plastic attached to the lock assembly; pull down on this tab and it should unlock the door for manual opening.
It is essential to be aware that the lid lock on a washer is an important safety measure designed to prevent injury and property damage when operating it. If you find yourself trying to operate the machine with its lid locked, first turn off power to the appliance before taking out the door switch.
Once the lid switch has been taken out, use a multi-meter to check for continuity in its wires. If there isn’t any continuity, this indicates that there is an issue with connection and needs replacement.
Many people struggle with this frustrating issue, but it doesn’t have to be. You can get replacement parts for your door switch online!
The most common cause of an LD error code is a blockage in the pump or filter drain. This can be due to lint or other debris obstructing its movement and making it harder for water to escape.
If the LD error code on your machine is flashing, try unplugging it and running through a manual diagnostics test outlined in your owner’s manual. If the motor hums briefly then stops, this indicates an issue with either the shifter or speed sensor assembly as it’s not reading motor speeds correctly.
If the issue persists, try reseting your control panel. This usually helps the door unlock and LD error code to stop flashing. However, if this doesn’t solve things, you might want to consider replacing the lid switch or checking for continuity in the door switch with a multi-meter.