If you’re interested in getting a used dresser for a great price, you can find refurbished dressers for a great deal. You can sand them down, apply paint, or stain them to give them a new look. These DIY projects can be done by yourself or with the help of a friend. Here are a few tips and tricks. Read on to learn more. Listed below are the steps you’ll need to take to restore a dresser for a great price.
Disassemble a dresser
If you’re considering a refurbished dresser, you might be wondering how to disassemble it. By following a few simple steps, you can easily disassemble your refurbished dresser, making it easier to move from room to room. To start, you will need a screwdriver or pliers. After identifying the location of each peg, you will need to remove it. Then, use pliers or a cloth to wiggle it out of the holes it’s attached to. Once you’re done, simply place the pegs in a plastic bag and store them somewhere safe.
Once you’ve removed the hardware, it’s time to disassemble the dresser. Before starting, make sure you have everything you need to start your repairs. You’ll need a hammer, screws, and nails. A bottle of wood glue will help you stick the pieces back together. Also, sandpaper can be used to remove the worn-out finish. If you’ve decided to use sandpaper, use medium-low grit for a clean surface. You can also use a belt sander if the surface is large enough. Be careful not to sand too deeply or damage the furniture. Take special care to inspect curved areas and decorative details.
You can also use stencils to add some character to your furniture. If you’re using fabric, consider using a stencil. After applying the paint, you should wait several days for the base color to dry completely. You may want to reinstall the drawers before applying the second layer of paint. Then, you can start reassembling your refurbished dresser. Just make sure that you’re not breaking any of the screws.
Sand it
Refurbished dressers can look great again, so why not try your hand at sanding them yourself? There are a number of ways you can achieve this. Sanding can help remove old paint and varnish, while cleaning scratches from wood. Before you start sanding, be sure to follow manufacturer instructions. Here are some tips to make your work easier. Once you’ve sanded the surface, you’ll be ready to apply new paint and varnish.
Before sanding, you’ll need some basic tools. A hammer, nail, screwdriver, bottle of wood glue, and a medium or low-grit sandpaper. When sanding, be careful not to damage the finish and pay attention to curved areas and decorative details. Also, be careful not to sand too deeply. You might even need to use a belt sander.
If your refurbished dresser has multiple layers of varnish, you can remove them by sanding it first. If you have a furniture piece with an even surface, you don’t need to sand it. Just make sure you clear off any dust that could interfere with the paint. Sanding is the most common method of finishing a piece of furniture, but it can also help your refurbished dresser look great!
First, you must decide on the color of the stain. Choose the stain that matches the wood color. It will determine the final color of the piece. If you choose a lighter color, you can use a darker one to give the dresser a fresh look. You can also choose a color by choosing the type of stain. It’s important to take the time to find the right stain for your refurbished dressers.
Apply paint
If you’re planning on painting a refurbished dresser, the first step is to determine what kind of hardware the piece has. If the dresser has hardware, consider if you can reuse the holes. If not, make sure you fill in any holes with wood filler. Deep scratches and dents can be filled with wood filler. Apply paint sparingly in order to avoid over-spray. Applying too much paint can result in drippy painted dressers.
When painting furniture, always apply a coat of clear wax over the entire piece. Then, you can apply a layer of dark wax on the details. Apply the wax with the same rag that you used for the clear coat. The transition from clear wax to dark wax should be seamless. Also, consider waxing the drawer rails. It will enhance the drawer’s function and prevent wood pieces from getting stuck. Applying wax to refurbished dressers will make them more durable and last longer.
If you plan to paint your refurbished dresser inside the house, make sure you’re using low VOC paint. Most furniture paints have low VOC content, making them safe for indoor use. If you can’t find low-VOC paint, buy chalk paint instead. Besides, find a room to move it to. You can also move it to the patio or basement. The process will be much simpler.
Stain it
Whether you’re looking for a fresh, new look for your home, or simply want to restore your refurbished dresser to its former glory, a fresh coat of paint can do wonders. Using the same type of stain as the original, staining your new dresser will be a breeze. Using a palm sander with a medium or fine grit sanding pad will give the piece a smooth surface. The next step is to apply a pre-stain wood conditioner to the piece. After the paint is dry, apply a second coat of stain with a natural bristle brush. If the piece is stained, you may consider applying a polyurethane coating to seal the finish.
To begin the staining process, you should first remove the old finish. Depending on the wood grain of the dresser, a stain or paint job may be easier than removing the old finish. It is important to wear protective gear and tarps while doing this task. You may want to consider applying a stain if you have a dresser with a thick coat of paint. However, if the drawers are not lined with a lining, you may prefer to use a paint instead.
When it comes to painting, you should choose a light-colored primer and paint. Light-colored paint will work best with white primer, while dark-colored paint will look better with grey primer. If you are using spray paint, it is important to wear safety equipment, as the paint offers less protection than traditional paint. Lastly, apply a coat of wax to the finished dresser. Wear cotton gloves to avoid contact with the wax.
Add fabric or wallpaper
If you’ve decided to upgrade drab refurbished dressers, consider adding fabric or wallpaper to them. These types of materials will not only look beautiful on the refurbished piece, but will also provide additional function. The process of adding fabric or wallpaper can be easy, too. All you need is some paint, fabric, and an adhesive spray. You can even stencil delicate designs with silver paint. Here’s how to do it.
When it comes to painting dressers, you have a lot of options. You can choose a classic colour that will never go out of style. If you want to go for a timeless look, consider a shade of stone-coloured paint. This colour will match any decor and will look great for years to come. You can also paint the interior of the dresser, which will create a chic storage space for food.
Replace the hardware
If you wish to refinish refurbished dressers, you can choose to replace the hardware. To replace the hardware, simply follow these steps. Before you begin, you should prepare the surface by dusting and cleaning thoroughly. You will also need to use a drill bit of the same size as the bolts or screws. After preparing the surface, you should use a drill bit to measure and mark the width of the screws or bolts.
To replace the hardware on a refurbished dresser, you will need to remove the old hardware. Once you have removed the old hardware, fill the holes. Use a drill to drill the new holes. Make sure you do not drill too deep or you may end up breaking the wood. Also, you should use painters tape to limit the possibility of splitting the wood. Once the new hardware is installed, you should drill a new hole for the drawers’ hardware.
Another way to repair refurbished dressers is to replace the drawer hardware. It is possible to buy replacement pieces of hardware that match the original hardware. The first step is to determine the center-to-center spacing of the pulls. To determine the center-to-center spacing of the pulls, you can measure from the center-to-center of one hole to the center of the other. This will help you choose a pull that matches the overall size of the dresser.
