A vaulted ceiling in the living room is a common design choice in mid-century modern homes. It gives the room a classic and elegant look. If you want to decorate the ceiling without spending a lot of money, you can choose flat board molding. The traditional look of crown molding is a bit too complicated for this type of space, but you can still use the material. Choosing narrow crown moulding will make the edges of the crown moulding sag, especially if you have a sloped ceiling.
Before purchasing any crown molding, measure the drop. The drop is the length of space that the crown extends from the ceiling. If the crown is too short, it will create an uneven appearance. In this case, you can buy two thin pieces of molding and space them a few inches apart vertically. In this way, you can create the illusion of a large crown molding. To make the room appear more formal, you can also choose to paint them white to show off the architectural details of the ceiling.
If you have a slanted ceiling, it will be difficult to install crown molding on it. A couple of tricks and the proper tools will make this task easier. First of all, you need to make sure you know the slope and cut the molding accordingly. Using a miter divider or digital angle finder will be very helpful. Just hold the divider up to the point of the slope and adjust the angle with the angle finder until it fits snugly along the border.
Next, you need to measure the height of the ceiling and determine its width and height. For this, you must measure the drop, the distance that the crown extends from the ceiling, and then calculate the amount of space that the crown should cover. For this purpose, the measurement should be as accurate as possible. The length of the drop is called the crown drop. The angle between the two ceiling planes should be at least 30.5 degrees.
In addition to the proper measuring tools, you must ensure that you have the right tools for the job. You must ensure that the crown molding will fit the slanted ceiling, and the slope should be able to be seen clearly from any angle. When installing crown molding on slanted ceilings, it is essential to ensure that the molding is level and follows the lowest point of the ceiling. Once you’ve found the correct height, you can proceed with the rest of the work.
Another trick for installing crown molding on a slanted ceiling is to use a digital angle finder. It’s not hard to use a digital angle finder, but it is important to measure the slope before you start. It will allow you to determine the correct height of the molding and then cut it to fit perfectly along the slope. If you have a vaulted ceiling, you should consider using a miter divider to measure it. It will enable you to hold the molding up to the slope and adjust it to fit the border with ease.
If you don’t have time to install a full-blown crown molding, you can use two thin molding pieces spaced a few inches apart vertically. This way, you’ll have a more uniform look than you’d normally have with a more elaborate project. Adding crown molding is not a difficult task, and it will not take too long to have it installed. Regardless of the style of the living room, you will be glad you used this method.
When you have a vaulted ceiling, the best option is to install a new crown molding. This piece of molding will add character and height to the room and will help make it look bigger. While it may seem a challenge to install crown moulding on a slanted ceiling, the end result will be well worth it. You’ll be pleased with the outcome. When you have the right kind of room, you will enjoy it for years to come.
