Whirlpool Washer – Door Locked Light Flashing

If you recently bought a Whirlpool washer and the door locked light is flashing, there are several fixes you can try. Some are straightforward fixes while others might necessitate more effort.

First and foremost, inspect the sensor actuator to make sure it’s functioning correctly. This integral component of your machine ensures that when the door has been closed securely and it’s safe to begin a cycle again, this sensor actuator tells you exactly when this signal has been received.

Check the Striker

If your washer’s door locks are flashing, it could be indicative of one or several problems. These could include a nonworking lid switch, an alignment issue with the striker, or an overall control lock malfunction.

To resolve a Whirlpool washer’s door lock that won’t close properly, inspect its striker. This component is crucial as it locks the door shut when closed and should be in proper alignment with both latch assembly and handle to keep your clothes dry and safe while they’re inside the machine.

When inspecting the striker, be sure to look for signs of damage or wear and tear. If it appears cracked or chipped, replace it immediately so your clothes remain protected.

When inspecting a striker, one important factor to consider is whether it’s genuine. Genuine parts should be available at most local home improvement stores; however, if it’s an aftermarket piece, you will need to locate an equivalent replacement.

You can also search online to see if any compatible replacements are available. If so, you should be able to find a great deal and have it shipped right to your door within no time.

Acquiring the correct parts for your appliance can save you money and prevent future issues. If you are uncertain which parts to order, don’t hesitate to ask a representative for advice.

If you’re not a DIY expert, it may be necessary to hire someone else to come out to your home and fix the problem for you. Nevertheless, this issue is quite common and there are plenty of solutions available that can help resolve it.

When your whirlpool washer’s door lock flashing light isn’t functioning properly, you can usually tell by the light flashing on the display panel. Here are some common causes and helpful solutions to fix them so you can get back to enjoying your machine again.

Check the Latch

If your Whirlpool washer’s door lock light is flashing, it could be due to something blocking the latch. To check, carefully take off the front panel and access the lock assembly by taking care not to cause injury when doing so.

A malfunctioning latch can be due to a variety of reasons, but the most frequent is that the mechanism has become damaged due to wear and tear or an electrical problem.

First, ensure the switch can detect when the lid has been closed and the striker engaged. You can do this with a multimeter. Furthermore, test the latch with a screwdriver to see if it moves into its lock position or not.

Next, remove the cover on the drain pump compartment on the right side of the machine by unscrewing its connection with the washer. Doing this will allow you to pull out its curly cord.

Once the door has been unlocked, you can continue washing. However, be aware that this procedure may cause your machine to shut down if the pump becomes clogged with debris or foreign material. To resolve this problem, either clean or replace the drain pump.

Another option is to reset your washer. This is usually the quickest and most convenient solution for most issues, though it may be difficult on newer models.

To resolve most problems, unplug your washer for around 10 minutes and then plug it back in. Usually, this should resolve most issues; however, if they persist, contact a professional for assistance.

If the latch is not the issue, other parts in your machine might need to be examined. These could include the lock button assembly, washtub, or latch assembly. In some cases, you may even have to replace the entire unit.

Check the Switch

Whirlpool washers boast an array of advanced features and high-end functions designed to make laundry day a breeze. However, just like any other appliance, Whirlpool washers can develop issues which need fixing if you find yourself dealing with a door locked light flashing issue. There are several straightforward steps you can take in order to get your machine up and running again without needing to call in an expert.

First and foremost, try to reset your washer. To do so, switch off the machine and disconnect it from its water supply line. Additionally, press “End Cycle” button and hold for 20 seconds.

If that doesn’t solve the problem, you should also inspect the switch. To do this, use a multimeter with a continuity tester.

To test for continuity, attach one probe to each screw terminal on either side of the switch. The reading should be opposite that of the first screw terminal.

Once you’ve identified the malfunctioning switch, replace it. If unsure how to proceed with this task, contact a local repair service for assistance.

Another common issue that may cause the lid lock of a Whirlpool washer to flash is forgetting to add clothes to the cycle. This issue occurs with both front-loading and top-loading washers alike.

When this occurs, you’ll need to unlock the washer before adding new items of clothing. Usually, simply unplugging the machine and holding down the cancel button will do the trick.

You may need to repeat this process several times until the cycle is complete. While this can be a frustrating experience, if you can manage it well enough, then it shouldn’t pose too many major issues for you.

The LD error code is an indication that your washer is taking too long to drain. This could be due to a blockage in either the drain hose or pump. To resolve this problem, clean out any obstruction and/or replace it if necessary.

Check the Motor

The motor is an integral part of a washer’s door lock system. If it malfunctions, the lock may stay stuck and prevent you from getting your clothes back. It could also interfere with normal operation of the machine, leading to issues like a stuck door.

Fix this problem by checking the motor’s electrical connections with a multimeter or voltmeter. If you find that any wires are faulty, they may need replacing. Alternatively, if you don’t have access to a voltmeter, use a flashlight to ensure there is enough power supply to operate the motor.

Another potential cause of a Whirlpool washer not working and its door locked light flashing is water drainage issues. This could occur if there’s a blockage in either the drain pump or hose connecting to it; in such cases you should inspect for kinks or other issues and replace the hose if necessary.

Whirlpool washers feature the option to disable the control lock, an important safety measure designed to keep children from accessing the settings on your machine. This lock helps maintain order in your household and ensure all settings remain secure.

If your control lock is disabled, your door may still open when pressed by one of the buttons on the front. To turn it off, locate a button with “control lock” written beneath it on the controls panel.

Next, press and hold the button for three seconds; this should turn off any flashing lights.

Top-load washers that have a defective lid switch or front-load models with malfunctioning door latches may lock their doors. You can test for continuity in these components using either a voltmeter or multimeter.

If none of the solutions above solve your whirlpool washer’s door locked light flashing problem, you can try reseting the machine. This is usually the simplest and quickest solution to fix the issue and will get rid of any flashing lights. Simply unplug your appliance from its outlet for about 10 minutes, plugging it back in should solve everything; try opening the door once more after that.

Recommended Articles